Dark Heat Transfer Paper

Operating Instructions:

First: PRINTING
1.Printer Setup.Recommend to select " Normal paper mode and best print quality" mode for satisfactory printing results.
2.Print the wishful image onto the transfer paper.Then leave it to dry for about 10 minutes.
Cut out the image, leaving a narrow margin of 5mm around the pattern edges.

Second: TRANSFERING
1.Preheat the iron to the setting of the highest temperature and take approx.2 minutes.
2.Do not use steam function. You can also use a transfer heat press machine.
3.Briefly iron the fabric to ensure that it is completely smooth.
5.Place the transfer paper onto the textile with the printed image facing upwards.
6.Cover the transfer film with the grease proof paper.
7.Iron the transfer film applying less pressure.Warm up the transfer evenly with slow circling
movements from edge to edge and make sure that the heat is evenly transferred over the entire area.
Don't forget the corners and edges.
8.Iron for max.2 minutes for motif on A4 sheet.
9.Allow the transfer to cool at least 1 minute,then peel off the grease proof paper in a smooth,even movement.
10.It's possible to use the same grease proof paper several times.
Third: WASHING

1.Please do not wash the textile within 24 hours after transferring.
2.Washing the textile in cold or 30-40 Celsius water. Do not wash with strongly alkaline detergents, and not bleach.
Avoid rubbing the transferred pattern when hand washing. Do not wring, Line dry in shade recommended
Don't dry-clean
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3 cm.